14 ©2001 Roland Corporation US VS-2480 Tip Sheet
Setting Region Edit Points Using the Position Line
You can set IN, OUT, FROM and TO points with greater precision using the editing
position line. Here’s how:
1. Press PHRASE•REGION•AUTOMIX repeatedly until it’s lit red.
2. Click the mouse at the desired time location in the project. A dotted vertical line
appears. This is called the “position line.”
3. Click the right mouse button on the track playlist. A pop-up
menu appears that offers a variety of options.
4. Drag to the name of the desired edit point so that it’s
highlighted in the pop-up menu.
5. Click the left mouse button—the selected edit point is set.
Other Features of the Edit Pop-Up Menu
You can perform quite a few actions from the Edit Pop-Up Menu. In all cases, once you
select the desired item from the pop-up menu, click the left mouse button:
To: First: Then right-click and:
Clear region edit points Press and hold CLEAR select the desired edit point.
Move the timeline Press and hold SHIFT select the desired edit point or
choose GOTO to move to the
current location of the position
line.
To: Right-click and:
Zoom in or out select ZOOM
↑↓
or ZOOM
↔
. In either case, a dialog
appears in which you can select the desired
magnification.
View the Wave Display from
the Home screen
select WAVE.
View the Home screen from
the Wave Display
select P.LIST.
Activate the VS-2480’s Scrub
feature
select SCRUB and left-click to checkmark it.
Use Scrub to preview audio select SCRUB TO to preview the audio just before the
position line, SCRUB THRU to listen to audio just
before and after the position line, or SCRUB FROM to
listen to a small chunk of audio starting at the
position line.
Select a track Sel Trk selects the track on which you’ve right-clicked
if no IN and OUT points have been set.
Position line
In this
illustration,
the IN point
is selected.
To Next Page
Loading...
