ACTION: Either interrupt recording or wait until recording
ends. Retry the operation.
Position Error
SITUATION: The specified area for track editing or quantiza-
tion is inappropriate.
ACTION: Specify a correct area.
Recording Error
SITUATION 1: Attempting to record too much sequencer
data at once will prevent the XP-80 sequencer from record-
ing it all.
ACTION 1: Reduce the amount of sequencer data and retry
recording.
SITUATION 2: Because the specified area for loop recording
or auto punch-in recording was inappropriate, the XP-80’s
sequencer could not record the sequencer data.
ACTION 2: For auto punch-in recording, check to see that
recording did not begin after the specified area.
Same Track or Pattern Selected
SITUATION: The same Phrase Track or Pattern is selected for
the Source track and Destination track for track editing.
ACTION: Select different Phrase Tracks or Patterns for the
Source track and Destination track.
System Exclusive Message:
Check Sum Error
SITUATION: The check sum of a received System Exclusive
message was incorrect.
ACTION: Set the correct Check Sum value.
System Exclusive Message:
Receive Data Error
SITUATION: A MIDI message was received incorrectly.
ACTION: If the same error message is displayed repeatedly,
the problem lies with the MIDI messages that are being
transmitted to the XP-80.
System Exclusive Message:
User Memory Write Protected
SITUATION: Since the System Exclusive Message parameter
(UTILITY/Protect/User Memory Protect) is set ON, the
System Exclusive message could not be received.
ACTION: Reset the System Exclusive Message parameter
OFF.
Unformatted Disk
SITUATION: This disk cannot be used by the XP-80.
ACTION: Format the disk on the XP-80.
User Memory Damaged
SITUATION: The data in user memory has been corrupted or
lost.
ACTION: Use the Factory Preset function (UTILITY/Factory)
to reinitialize the memory to factory default settings.
User Memory Write Protected
SITUATION: Because the Write Operation parameter (UTILI-
TY/Protect/User Memory Protect) is ON, the writing opera-
tion could not execute.
ACTION: Reset the Write Operation parameter OFF.
Volume Name Format Error
SITUATION: It is not possible to assign a blank volume
name.
ACTION: Specify a character or symbol.
You Cannot Copy This Message
SITUATION: The specified data cannot be copied.
You Cannot Delete End of Step
SITUATION: The last step of a chain (END) cannot be delet-
ed.
You Cannot Erase This Message
SITUATION: The specified data cannot be erased.
You Cannot Move This Message
SITUATION: The specified data cannot be moved.
You Cannot Save This Song as an SMF
SITUATION: This song contains copyrighted information.
Songs that contain copyrighted information cannot be saved
as a Standard MIDI File.
ACTION: Save the data as an MRC Pro song.
You Cannot UNDO!!
SITUATION: The most recently executed operation cannot be
undone by pressing [UNDO/REDO].
189
Chapter 12. Supplementary material
To Next Page
Loading...
