Roland XP-80 - System Parameters

204
Chapter 12. Supplementary material
System Parameters
Setup Group
Setup Display (P.88)
Parameter Name Full Name of Parameter Value
LCD Contrast LCD contrast 1—10
Patch Remain Patch remain ON,OFF
Power Up Mode Power up mode LAST-SET,DEFAULT
Character Style Character style TYPE1,TYPE2,TYPE3,TYPE4
Transpose Value Transpose value -5 (G)—+6 (F#)
Keyboard Sens Keyboard sensitivity LIGHT,MEDIUM,HEAVY
Keyboard Velocity Keyboard Velocity REAL, 1—127
Aftertouch Sens Aftertouch sensitivity 0—100
Tune Group
Tune Display (P.89)
Parameter Name Full Name of Parameter Value
Master Tune Master tune 427.4—452.6Hz
Master Key Shift Master key shift -12—+12 semitone
Switch Scale tune switch OFF,ON
Scale Tune Scale tune C—B -63—63 cent
MIDI Group
MIDI Param 1 Display(PERFORM) (P.90)
Parameter Name Full Name of Parameter Value
Performance Ctrl-Ch Control channel 1—16,OFF
Local Switch Local switch OFF,ON
Remote Keyboard Sw Remote keyboard switch OFF,ON
Device ID Number Device ID number 17—32
Rx Sys. Excl Receive system exclusive message switch OFF,ON
Tx Edit Data Transmit edit data switch OFF,ON
Rx GM-ON Message Receive GM-ON switch OFF,ON
MIDI Param 1 Display(PATCH) (P.90)
Parameter Name Full Name of Parameter Value
Patch Rx-Ch Patch Receive channel 1—16,RX-CH,OFF
Patch Tx-Ch Patch Transmit channel 1—16
Local Switch Local switch OFF,ON
Remote Keyboard Sw Remote Keyboard switch OFF,ON
Device ID Number Device ID number 17—32
Rx Sys. Excl Receive system exclusive message switch OFF,ON
Tx Edit Data Transmit edit data switch OFF,ON
Rx GM-ON Message Receive GM-ON switch OFF,ON
MIDI Param 1 Display(GM) (P.91)
Parameter Name Full Name of Parameter Value
Local Switch Local switch OFF,ON
Remote Keyboard Sw Remote Keyboard switch OFF,ON
Device ID Number Device ID number 17—32
Rx GM-ON Message Receive GM-ON switch OFF,ON
MIDI Param 2 Display (P.91)
Parameter Name Full Name of Parameter Value
Rx Program Change Receive program change switch OFF,ON
Rx Bank Select Receive bank select switch OFF,ON
Tx Program Change Transmit program change switch OFF,ON
Tx Bank Select Transmit bank select switch OFF,ON
Tx Active Sensing Transmit active sensing switch OFF,ON