Roland XP-80 - Page 233

233
Quick reference of displays
❚
Performance mode [PERFORM]
Play display
Pressing [F1] (Common)
Playing a Performance
(p.29)
Naming a Performance and setting Key Mode, etc. (p.65)
Pressing [F2] (K.Range)
Setting the keyboard range (p.66)
Pressing [F3] (Part)
Setting a Patch, volume level, etc. for each Part (p.66)
Pressing [F4] (MIDI)
Making MIDI settings for each Part (p.67)
Pressing [F5] (Effects)
[F1] (General) Setting effects routing (p.68)
[F2] (EFX Prm) Setting EFX parameters (p.74)
[F3] (EFX Ctl) Modifying EFX using controllers (p.63)
[F4] (Chorus) Setting chorus parameters (p.64)
[F5] (Reverb) Setting reverb parameters (p.64)
Pressing [LOCAL/TX/RX]
[F1] (LcTxRx) Setting Local Sw, Tx Switch, Rx Switch, etc. for each Part (p.66)
[F2] (System) Setting Local Switch and Performance Ctrl-Ch (p.90)
[F3] (Tx P.C) Transmitting Program and Bank Select numbers to external MIDI devices (p.182)
Pressing [SOUND LIST]
Displaying the Performance list (Sound List window) (p.29)
Pressing [F6] (Info)✳
[F1] (Mod) Confirming the Modulation message receive status and transmitting values (p.69)
[F2] (Breath) Confirming the Breath message receive status and transmitting values (p.69)
[F3] (Foot) Confirming the Foot message receive status and transmitting values (p.69)
[F4] (Volume) Confirming the Volume message receive status and transmitting values (p.69)
[F5] (Pan) Confirming the Pan message receive status and transmitting values (p.69)
[F1] (Exp) Confirming the Expression message receive status and transmitting values (p.69)
[F2] (Hold) Confirming the Hold message receive status and transmitting values (p.69)
[F3] (Bend) Confirming the Pitch Bend message receive status and transmitting values (p.69)
[F4] (Aft)
Confirming the Channel Aftertouch message receive status and transmitting values (p.69)
[F5] (Voices) Confirming the number of voices used (p.69)
[F1] (Sys 1) Confirming System Controller 1 message receive status and transmitting values (p.69)
[F2] (Sys 2) Confirming System Controller 2 message receive status and transmitting values (p.69)
✳ Each time [F6] is pressed, the function of [F1]--[F5] will change.