Pressing [F6] (List)
Displaying the song list (Song List window) (p.98)
Pressing [LOCATE]
Setting Locate positions or moving to a Locate position (p.119)
Pressing [REC]
Getting ready for realtime recording (p.106)
[F1] (->Part) Setting parameters of each Part (p.111)
[F2] (->Info) Checking MIDI messages received by each Part (p.111)
[F3] (Rec Sel) Recording specific sequencer data only (p.109)
[F4] (Quantiz) Performing quantization at recording (p.106)
[F5] (Loop) Setting Loop recording parameters (p.120)
[F6] (A.Punch) Setting Punch points (auto punch-in recording area) (p.108)
[START/STOP] Starting recording (p.106)
[F5] (Erase) Deleting unwanted data during recording (Realtime Erase) (p.110)
<During recording (Mix)>
[F6] (Rehrsal) Checking instrument sounds or phrases during recording (p.109)
<During recording (except manual punch-in recording)>
[F6] (PunchIn) Performing manual punch-in recording (p.109)
<During recording (Manual punch-in recording)>
[F6] (Tap) Recording tempo changes using Tap Tempo function (p.110)
<During tempo change recording>
To Next Page
Loading...
