rollibot ROLLICOOL 208 - Setting Up the Unit; Window Kit Installation

10
RolliBot RolliCool 208 Portable AC with Heater User Manual
Section 3. Setting Up the Unit
• Before using the unit, keep it upright for at least two hours.
• Do not use extension cords etc. Only plug the unit into a grounded wall outlet.
• Do not use the unit in bathrooms or other excessively humid environments.
• After installation, keep the unit at least 20 in. from the walls at all times.
Window Kit Parts
BA
Screw Head
Washer
Screw Base
B
B
A
Sections
These sections thread into one another and
should be placed within a window gap.
Screw Fastener
These parts are used to secure the sections
together and can be loosened or tightened
when adjusting the sections according to
window height.
Installation
Step 1. Separate one screw fastener and
thread the screw base into one end of Section
B.
Step 2. Thread Section A onto the end of
Section B and use the screw head and washer
to secure the sections together.