Reference Manual
00809-0100-4809, Rev DA
Appendix A: Specifications and Reference Data
September 2015
105
Specifications and Reference Data
Special inspection D 1-7
QC1 Visual and dimensional inspection with certificate • • ★
QC7 Inspection and performance certificate • • ★
Transmitter calibration certification
Q4 Calibration Data Certificate for Transmitter • • ★
QP Calibration Certificate and Tamper Evident Seal • • ★
Quality certification for safety
QS
(21)(22)
Prior-use certificate of FMEDA data • — ★
QT
(21)(22)(25)
Safety certified to IEC 61508 with certificate of FMEDA data • — ★
Material traceability certifications
Q8 Material traceability certification per EN 10204:2004 3.1 • • ★
Code conformance
J2 ANSI/ASME B31.1 • •
J3 ANSI/ASME B31.3 • •
J4 ANSI/ASME B31.8 • •
Material conformance
(23)
J5 NACE MR-0175/ISO 15156 • •
Country certification
J1 Canadian Registration • •
Product certifications
E1 ATEX Flameproof • • ★
I1 ATEX Intrinsic Safety • • ★
IA ATEX FISCO Intrinsic Safety; for FOUNDATION Fieldbus protocol only • — ★
N1 ATEX Type n • • ★
ND ATEX Dust • • ★
K1 ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND) • • ★
E4 TIIS Flameproof • • ★
E5 FM Explosion-proof, Dust Ignition-proof • • ★
Table 2. Rosemount 3051SFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
To Next Page
Loading...
