To Next PageTo Next Page
Need help?Do you have a question about the Rosemount 3300 Series and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Type | Level Transmitter |
| Model | 3300 Series |
| Communication Protocol | HART |
| Output Signal | 4-20 mA |
| Operating Temperature | -40 to 85 °C |
| Process Pressure | Up to 40 bar |
| Process Connection | Threaded, Flanged |
| Mounting | Top-mounted |
| Enclosure Rating | IP66 |
| Material | 316L SST |
How to set alarm and write protection jumpers on the circuit board.
How to set alarm and write protection using the LCD display.
Steps to connect wiring to the transmitter, including grounding and power.
Wiring diagrams for HART output, including intrinsic safety connections.
Specific wiring for Intrinsically Safe HART output connections.
Wiring diagram for Non-intrinsically Safe Modbus output.
Instructions for installing and starting the RCT software for configuration.
Details Flameproof (E1) and intrinsic safety conditions for ATEX.
Details intrinsic safety parameters and conditions for BASEEFA ATEX approval.
Covers Factory Mutual approvals for explosion-proof and intrinsically safe use.
Outlines IECEx approvals for flameproof and intrinsic safety certifications.
