To Next PageTo Next Page
Need help?Do you have a question about the Rosemount 2051 and is the answer not in the manual?
General| Accuracy | ±0.075% of span |
|---|---|
| Model | 2051 |
| Category | Transmitter |
| Display | Optional LCD |
| Operating Temperature | -40 to 185°F (-40 to 85°C) |
| Environmental Rating | NEMA 4X, IP66 |
| Measurement Type | Absolute |
| Service | Liquid, gas |
| Output | 4-20 mA HART |
| Mounting | Direct or remote |
| Process Connection | 1/2-14 NPT |
| Electrical Connection | 1/2-14 NPT, M20 x 1.5 |
| Communication Protocol | HART |
| Material | 316L SST, Hastelloy C-276 |
Details mounting procedures for liquid, gas, and steam process applications.
Guidelines for flange assembly, bolt torquing, and O-ring selection for secure installation.
Instructions for rotating the transmitter housing and setting security/simulate jumpers.
Steps for connecting wiring, ensuring proper grounding, and power supply.
Covers LOI, address assignment, engineering units, and Class 2 master configuration.
Performing a zero trim via LOI or Class 2 Master to correct mounting position errors.
Details North American (FM, CSA) and European (ATEX) hazardous location approvals.
Information on IECEx, TIIS, GOST, Inmetro, and combined certification types.
Declaration of product conformity to European directives (EMC, PED, ATEX).
