Need help?Do you have a question about the Rosemount 708 and is the answer not in the manual?
General| Output Signal | WirelessHART |
|---|---|
| Power Supply | Internal Battery |
| Wireless Protocol | WirelessHART |
| Hazardous Area Approvals | ATEX, IECEx, FM, CSA |
| Enclosure Rating | IP66/67 |
| Communication Protocol | WirelessHART |
| Temperature Range | -40 to 85 °C |
| Battery Life | Up to 10 years |
| Operating Temperature | -40 to 85 °C |
| Enclosure | Aluminum or Stainless Steel |
| Type | Wireless Acoustic Transmitter |
| Process Temperature Range | -40°C to 125°C (-40°F to 257°F) |
Steps for configuring the sensor settings of the Rosemount 708 transmitter.
Instructions for setting up the wireless network parameters for the device.
Describes the general procedure for physically installing the Rosemount 708 transmitter.
Specific instructions for attaching the transmitter directly to a pipe.
Methods and steps to confirm the correct functioning of the transmitter after installation.
Detailed procedure for replacing the power module of the transmitter.
To Next Page