Ross Carbonite Series - Memory Functions; To Set the Key Type Attribute; To Set the Key Mask Attribute; To Set the Media-Store Attribute

3.
Use the Key knob to select the keyer you want to
set the attribute for.
4.
Use the Value knob to select whether sources
selected on the selected key bus are recalled.
•
Memory — settings come from the memory
being recalled
•
NoRcl — sources are not recalled on the key
bus
•
Recall — sources are recalled on the key bus
(default)
To Set the Key Type Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select KType.
3.
Use the Key knob to select the keyer you want to
set the attribute for.
4.
Use the Value knob to select whether the key type
is recalled for the selected key.
•
Memory — settings come from the memory
being recalled
•
NoRcl — key type is not recalled
•
Recall — key type is recalled (default)
To Set the Key Mask Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select KMask.
3.
Use the Key knob to select the keyer you want to
set the attribute for.
4.
Use the Value knob to select whether mask settings
for the selected key are recalled.
•
Memory — settings come from the memory
being recalled
•
NoRcl — key mask settings are not recalled
•
Recall — key mask settings are recalled
(default)
To Set the Media-Store Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select Media.
3.
Use the Media knob to select the Media-Store
channel you want to set the attribute for.
4.
Use the Value knob to select whether Media-Store
image and settings for the selected channel are
recalled.
•
Memory — settings come from the memory
being recalled
•
NoRcl — Media-Store image and settings are
not recalled (default)
•
Recall — Media-Store image and settings are
recalled
To Set the Aux Bus Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select Aux.
3.
Use the Aux knob to select the aux bus you want to
set the attribute for.
4.
Use the Value knob to select how the sources
selected on the aux bus are recalled.
•
Memory — settings come from the memory
being recalled
•
NoRcl — sources are not recalled on the aux
bus (default)
•
Recall — sources are recalled on the aux bus
To Set the Camera Shot Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select CamRcl.
3.
Use the Value knob to select whether camera shots
are recalled.
•
Memory — settings come from the memory
being recalled
•
NoRcl — camera shots are not recalled
•
Recall — camera shots are recalled (default)
To Set the Roll GPO Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select RllGPO.
3.
Use the Value knob to select whether GPI outputs
attached to sources are triggered when recalled.
•
Memory — settings come from the memory
being recalled
•
NoRoll — GPI outputs are not triggered
•
Roll — GPI outputs are trigged (default)
To Set the Roll VTR Attribute
1.
Press MENU > RECALL (or ME 1 RECALL) >
NEXT.
2.
Use the Attrib knob to select RllVTR.
Carbonite Operation Manual (v13.0) — Memory Functions • 51