XPression Prime • Maintenance Guide
• Ross Part Number: 3503DR-006-01
• Release Date: November 22, 2012. Printed in Canada.
The information contained in this Guide is subject to change without notice or obligation.
Copyright
© 2012 Ross Video Limited. All rights reserved.
This work is proprietary and confidential to Ross Video Limited, its subsidiaries and its other affiliated corporations
and may not be copied, distributed, sold or otherwise used or relied upon without the express written permission of
Ross Video Limited. Reproduction or reverse engineering of copyrighted software is prohibited.
Notice
The material in this manual is furnished for informational use only. It is subject to change without notice and should
not be construed as commitment by Ross Video Limited. Ross Video Limited assumes no responsibility or liability
for errors or inaccuracies that may appear in this manual.
Trademarks
• is a registered trademark of Ross Video Limited.
• Ross, ROSS, ROSS
®
, and XPression™, are registered trademarks of Ross Video Limited.
• Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
• Intel® and Pentium® are registered trademarks of Intel Corporation.
• All other product names and any registered and unregistered trademarks mentioned in this guide are used for
identification purposes only and remain the exclusive property of their respective owners.
Important Regulatory and Safety Notices to Service Personnel
Before using this product and any associated equipment, refer to the "Important Safety Instructions" listed below so
as to avoid personnel injury and to prevent product damage.
Products may require specific equipment, and /or installation procedures be carried out to satisfy certain regulatory
compliance requirements. Notices have been included in this publication to call attention to these Specific
requirements.
Symbol Meanings
Protective Earth — This symbol identifies a Protective Earth (PE) terminal, which is
provided for connection of the supply system’s protective earth (green or green/yellow)
conductor.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product. Failure to heed this information may present a risk of damage or injury to persons
or equipment.
Warning — The symbol with the word "Warning" within the equipment manual indicates a
potentially hazardous situation, which if not avoided, could result in death or serious injury