Controller Functionality
AYC-x6355 Installation and User Manual 33
8. Controller Functionality
Upon power-on reset, the AYC-x6355 searches for the presence of
Rosslare's secure application appurtenances. If a secure application
appurtenance is detected, then the AYC-x6355 is automatically
configured as a secure access control unit, as indicated by the orange
Mode LED.
The Lock Strike and Auxiliary outputs, as well as the REX input, are
not located on the AYC-x6355 unit, eliminating the possibility of
unauthorized entry to the restricted area.
This chapter explains how the unit functions as a controller.
8.1 Normal, Secure, and Master Users
The AYC-x6355 accepts up to 500 users and provides entry via the
use of PIN codes and/or proximity cards. Each user is provided with
two code memory slots, Memory Slot 1 (Primary code) and Memory
Slot 2 (Secondary code).
The PIN code length has several options. The PIN code length can be a
set number of 4, 5 or 6 digits or it can be a 4-8 digits option. When
choosing the 4- to 8-digit option, please note that you should either
enter zeros before the code, or press pound at the end (for example,
if your code is 12345, enter either 00012345 or 12345#).
Entering a code refers to either PIN or card.
The way in which the two memory slots are programmed determines
a user’s access level and also determines the way in which the unit
grants access in its three modes of operation. There are three user
levels:
Normal user
A Normal user only has a Primary code and is only granted access
when the unit is in Normal or Bypass mode.
To Next Page
Loading...
Need help?
General
