Reader Functionality
AYC-Qx4 family manual Page 16
Mode/Transmit
Door/Program
Red
Mode/Transmit
Door/Program
Red
Entering Programming Mode
1) Press the # key 4 times.
• Transmit LED will turn off.
• Program LED will turn red.
2) Enter your 4 digit Programming
Code. If the Programming
Code is valid, the door LED
will turn green and the
AYC-Qx4 will be in Programming Mode.
Note:
• The factory 4-digit Programming Code is 1234.
• If a Programming Code is not entered within 30 seconds, the
AYC-Qx4 will return to Transmit Mode.
Exiting Programming Mode
1) To exit the Programming Mode at any time press #:
• You will hear a beep
• The Program LED will be
off
• The Transmit LED will turn red
2) This indicates that the AYC-Qx4 has returned to Transmit
Mode.
3) Wrong entries may reset the reader back to Transmit Mode.
While in Programming Mode if no key is pressed for 30
seconds the AYC-Qx4 will exit Programming Mode and return
to Transmit Mode.
? ? ? ?
Mode/Transmit
Door/Program
Green
To Next Page
Loading...
