Controller Functionality
AYC-Qx4 family manual Page 39
Changing the Normal / Secure Code
1) Enter Programming mode.
2) Press “4” to enter Menu 4
• The Mode LED will flash
red.
3) Enter the new code you
wish to set as Normal / Secure Code
4) System returns to Normal
mode
• You will hear three beeps
Note:
• Code 0000 will erase the Normal / Secure Code.
• This code is disabled in case the Auxiliary Input is set to toggle
between Normal and Secure access modes.
• Default Normal/Secure code is 3838
Changing the Normal / Bypass Code and Door Chime Settings
1) Enter Programming mode.
2) Press “5” to enter Menu 5
• The Mode LED will flash
orange.
3) Hereafter, are four different
ways to program the normal / bypass code and door chime.
a. Disable both Bypass Code and the
door chime.
Enter the code 0000.
b. Disable Bypass Code and enable the
door chime.
Enter the code 0001.
c. Enable Bypass Code and disable the
door chime.
Enter any code ending with 0.
4
? ? ? ?
5
0 0 0 0
0 0 0 1
? ? ? 0
Mode/Transmit
Door/Program
Green
Mode/Transmit Door/Program
Red
Green
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Pro
ram
Orange
Green
Mode/Transmit
Door/Pro
ram
Green
To Next Page
Loading...
Need help?
General
