Controller Functionality
AYC-Qx4 family manual Page 50
Enrolling Primary and Secondary Codes
Primary Codes
• Primary Codes can only be enrolled to an empty User Slot,
i.e. a slot where there is no existing Primary Code.
• Primary Codes must be unique, i.e. one user’s Primary
Code may not be the same as other users Primary Code.
• Primary Codes cannot be the same as any system codes,
such as the Normal / Secure Code or Lock Strike Code.
• Users who hold a Primary Code can gain entry only during
Normal mode.
Secondary Codes
• Secondary Codes can only be enrolled to User Slot that
already has a Primary Code enrolled but no Secondary
Code.
• Secondary Codes do not have to be unique, i.e. multiple
users can all hold the same Secondary Code.
• Secondary Codes cannot be the same as any system
codes, such as the Normal / Secure Code or Lock Strike
Codes.
• Users who hold Secondary Codes can gain entry in any
Mode of Operation.
Enrolling Primary and Secondary Codes
There are two methods to enroll Primary and Secondary codes,
the Standard Method and the Code Search Method.
• The Standard Method is mainly used when the User Slot
number for the user you wish to program is known. You can
program both Primary and Secondary Codes using the
Standard method. (See Enrolling Primary and Secondary
Codes using the Standard Method on page 51.)
To Next Page
Loading...
Need help?
General
