Rosslare AYC-Q54B User Manual

Controller Functionality
AYC-Qx4 family manual Page 59
based on the PIN code length you chose (see Programming
Menu on page 35), before the controller reverts to the
existing code.
Replacing a Lost Normal / Secure Code
Note:
• The AYC-Qx4 must be in Secure Mode, otherwise this will not
work. Make sure that the Mode LED is red before
proceeding.
1) Remove power from the Power Supply Unit.
2) Press the REX Button on the Power Supply Unit.
3) Apply power to the unit with the REX button pressed.
4) Release the REX Button.
5) You now have 15 seconds to program a new Normal /
Secure code into the Access Control unit using the default
code based on the PIN code length you chose (see
Programming Menu on page 35), before the controller
reverts to the existing code.

Rosslare AYC-Q54B Specifications

General

Brand	Rosslare
Model	AYC-Q54B
Category	Controller
Language	English