Rotary 200 Series User Manual

9
Cause
1. Overhead Sensor Actuated.
2. Up button not functioning.
3. Incorrect voltage to power unit.
1. Overloading lift.
1. Broken latch spring.
Remedy
1. Check sensor for contact with vehicle.
2. Check UP button on opposite column if
neither UP button is functioning contact
service representative for further
assistance.
3. Contact service representative for further
assistance.
1. Check vehicle weight and/or balance the
vehicle's weight on lift.
2. Contact service representative for further
assistance
1. Contact service representative for further
assistance.
TROUBLE SHOOTING FOR OPERATORS
FOR E SERIES LIFTS
button actuated but lift doesn't raise
button actuated but lift doesn't lower
Cause
1. Down button not functioning.
2. Safety Latches won't release.
3. Lowering Valve not functioning.
Remedy
1. Contact service representative for further
assistance.
2. Contact
service representative for further
assistance.
3. Contact
service representative for further
assistance.
Trouble
Lift won't lower.
Trouble
Motor won't run.
Motor runs but will not raise lift.
Locking latches do not engage.
Trouble
Lift won't lower.
Cause
1. Down button not functioning.
2. Lowering Valve not functioning.
Remedy
1. Contact service representative for
further assistance.
2. Contact
service representative for
further assistance.
button actuated but lift doesn't lower

Rotary 200 Series Specifications

General

Brand	Rotary
Model	200 Series
Category	Lifting Systems
Language	English