EasyManuals Logo

Rotax 914 series User Manual

Rotax 914 series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
Effectivity: 914 Serie BRP-Powertrain page 8-1
OM Edition 2 / Rev. 0 April 01/2010
d04480.fm
8) Checks
Introduction All checks to be carried out as specified in the current Mainte-
nance Manual (last revision).
Table of content This chapter of the Operators Manual contains checks of the air-
craft engine.
WARNU
WARNING
Non-compliance can result in serious
injuries or death!
Only qualified staff (authorized by the Avi-
ation Authorities) trained on this particu-
lar engine, is allowed to carry out
maintenance and repair work.
NOTICE
Carry out all directives of Service Bulletins
(SB), according to their priority.
Observe according Service Instructions (SI)
and Service Lettter (SL).
Subject Page
Engine preservation
page 8-2
Engine back to operation page 8-2

Table of Contents

Other manuals for Rotax 914 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 914 series and is the answer not in the manual?

Rotax 914 series Specifications

General IconGeneral
Bore79.5 mm
Stroke61 mm
Compression Ratio9.0:1
Cooling SystemLiquid-cooled cylinder heads, air-cooled cylinders
Redline5800 rpm
Engine Type4-cylinder, 4-stroke
Fuel TypeAvgas 100LL
Oil SystemDry sump
Fuel Systemfuel injection
TBO (Time Between Overhauls)2000 hours
Displacement1.211 liters (1211 cc)
Power Output84.6 kW (115 hp) at 5, 800 rpm

Related product manuals