7 x Hydraulic system connection
48
FA ROTEX Solaris RPS3 P2 - 06/2012
Table 7-1 Short names in hydraulic drawings
Series connection
As an alternative to the parallel circuits of the solar panels described in these instructions (see also image 2-1), if required a
maximum of three rows of solar panels can also be installed above one another. Solar panels or solar panel arrays installed in
this way must be connected in series (image 7-4). For the selected solar system, one pack of row connectors CON LCP
( 16 20 45) is required for each additional row of solar panels.
Fig. 7-4 Alternative solar panel arrangement
T
K
Solaris collector temperature sensor
Supplied with RPS3 P2.T
R
Solaris return temperature sensor
T
S
Solaris storage tank temperature sensor
T
V
Solaris flow temperature sensor Included with FLS20.
UV1 3-way switch valve Supplied with AMK1.
VS Scalding protection VTA 32 Accessories 15 60 15
Short name Meaning Remark Order No.
1 Collector connector
2 Mounting rail
3 Collector securing hook
4 Solaris flat collector
5 Return flow connection collector
6 Inflow connection collector
7 Collector sealing cap
8 Customer-fitted ventilation slate for roof penetration pipes flow and
return flow
9 VA 18 Solar return flow pipe
10 VA 15 Solar inflow pipe
11 Panel row connector CON LCP
12 Solaris solar panel (2x 2 collectors)
To Next Page
Loading...