Special Description
Before operating the machine, anyone should read this description carefully and keep it well
to ensure the equipment and operator’s safety, as well as others’ safety.
2.1 The machine is used to weld pipes made from PE, PP, PVDF and can
not be used to weld material without description, otherwise the machine
may be damaged or some accident may be resulted in.
2.2 Don’t use the machine in a place with potential hazard of explosion
2.3 The machine should be operated by responsible, qualified and trained personnel.
2.4 The machine should be operated on a dry area. The protective measures should be
adopted when it is used in rain or on wet ground.
2.5 The machine is operated by 220V±10%, 50/60 Hz. If extended wire should be used, it
should have enough lead section according its length.
2.6 Before using the machine, fill 46# hydraulic oil. Make sure the hydraulic oil is enough for
working; the oil level should be 2/3 of the tank. Replace the iron oil tank cap by the red plastic
air bleed cap or the pressure can not be hold.
To Next Page
Loading...
