Rothenberger ROWELD E Series - Personnel Safety During Operation

7
If only following above mentioned, the precaution can work well.
3.2.7 Starting
Make sure the switch of the machine is closed before powering it on.
3.2.8 Tightness of parts
Make sure the pipes are fixed correctly. Ensure that it can move well and prevent it from
sliding down.
3.2.9 Work in environment with hazards
When work in a ditch, check if there is fender which stop the earth or stones from falling down
to the machine, and also check if it has a water or other fluid leaking, if there be, the operator
may get an electric shock.
When lift the machine to ditch, the weight of the machine should be within the rated lifting
weight, and person is forbidden staying under the lifting arm.
Avoid using the machine in the environment full of paint, gas, smoke and deoil, since the
infection of eyes and respiratory tract would be caused.
Do not put the machine in a dirty place.
3.2.12 Personnel safety while working
Remove jewelry and rings, and does not wear loose-fitting clothing avoid wearing shoe lace,
long mustache or long hair that may be hooked into the machine
The following is the operation rules:
---Wear safety groove
---Wear safety shoes
---Dress work clothes
---Wear safety glasses
---Wear earmuffs
3.2.14 Untrained person is not allowed to operate the machine anytime.