Need help?Do you have a question about the rotork IQTM and is the answer not in the manual?
Overview of the setting procedure using the infra-red setting tool.
Settings for end of travel limits, torque values, and limit positions.
Settings for control, indication, and optional equipment functions.
Specification, certification, and operating range of the infra-red setting tool.
Configuring the torque value for closing direction, varying from 40% to Rated.
Configuring how the actuator responds to emergency shutdown, local/remote control, and interlocks.
Setting the actuator's response to an active ESD signal (Close, Stay put, Open).
Overview of battery failsafe operation, power sources, and failsafe actions.
Configuring links, fuses, and secondary settings for desired failsafe action.
Overview of the setting procedure using the infra-red setting tool.
Settings for end of travel limits, torque values, and limit positions.
Settings for control, indication, and optional equipment functions.
Specification, certification, and operating range of the infra-red setting tool.
Configuring the torque value for closing direction, varying from 40% to Rated.
Configuring how the actuator responds to emergency shutdown, local/remote control, and interlocks.
Setting the actuator's response to an active ESD signal (Close, Stay put, Open).
Overview of battery failsafe operation, power sources, and failsafe actions.
Configuring links, fuses, and secondary settings for desired failsafe action.
General| Type | Electric Actuator |
|---|---|
| Control | Modulating or On/Off |
| Torque Range | Up to 3, 000 Nm |
| Power Supply | 24V DC, 110V AC, 240V AC, 415V AC |
| Operating Temperature | +70°C |
| Protection Rating | IP68 |
| Data Logging | Yes |
| Communication Protocols | Modbus, Foundation Fieldbus, Profibus |
| Position Sensing | Absolute encoder |
| Display | LCD |
| Hazardous Area Certification | ATEX, IECEx |
To Next Page
