Section 3 Safety 3-3 S85A / S86A Manual
www.rottlermfg.com
No list of safety guidelines can be complete. Every piece of shop environment
is different. Always consider safety first, as it applies to your individual working conditions. Use this and
other machinery with caution and respect. Failure to follow guidelines could result in serious personal
injury, damage to equipment or poor work results.
Electrical Power
All electrical power should be removed from the machine before opening the rear electrical enclosure. It
is recommended that the machine have a electrical LOCK-OUT device installed.
Make sure all electrical equipment has the proper electrical overload protection.
In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least
resistance to disperse electric current.
Electrocution or a fire can result if the machine is not grounded correctly. Make sure the ground is
connected in accordance with this manual. DO NOT operate the machine if it is not grounded.
No single list of electrical guidelines can be comprehensive for all shop
environments. Operating this machinery may require additional electrical
upgrades specific to your shop environment. It is your responsibility to make sure your electrical system
comply with all local codes and ordinances.
To Next Page
Loading...
