Roundup VCT-2 - ADJUSTING TOAST QUALITY; HI LIMIT RESET BUTTON; SHUTTING DOWN THE TOASTER; RESET TO DEFAULT SETTINGS

8
P/N 1011271 Rev. A 06/14
ADJUSTING TOAST QUALITY
The unit can be adjusted to provide a
lighter or more darkly toasted product.
The lightest setting is 1 and the darkest
setting is 10.
Follow these steps to adjust toasting
quality.
To view the current Light/Dark setting,
briey press Light or Dark button. The
current Light/Dark setting
appears in the display.
When the toaster reaches the newly
set Light/Dark temperature, the USE
message stops ashing and remains
on. The toaster is ready for use.
NOTE: The Light/Dark value is
maintained when the
unit is powered o.
1
2
SHUTTING DOWN THE TOASTER
To turn the toaster o, turn the Power
switch to the o position.
RESET TO DEFAULT SETTINGS
Follow these steps to reset the toaster
to the factory settings
Follow these steps to reset to default
settings:
1. Turn the toaster o.
2. Pres and hold both the
Light and Dark buttons
and turn the toaster on.
3. Continue holding the Light and
Dark buttons until “fr” (factory
reset) appears in the display. The
toaster beeps when resetting is
done and starts up normally.
HI LIMIT RESET BUTTON
A hi-limit control turns o power to
the unit if it overheats. To reset this Hi-
Limit control, allow sucient time (10-
15 minutes) for the unit to cool down,
then remove the Hi-Limit control cap
and press the reset button located
on the bottom of the unit. If the unit
requires continuous resetting, call for
service.
HILIMIT RESET
BUTTON
D 4
To change the Light/Dark setting,
press and hold the Light or Dark but-
ton until the unit beeps.
Press the Light or Dark button set the
Light/Dark value as desired. Release
the Button. The USE message ashes
in the display as the unit adjusts the
platen temperature accordingly.
1
USE
USE
ERRORS
The toaster displays any kind of error
message, contact the factory immedi-
ately at 1-630-784-1000