VERTICAL CONTACT TOASTER
27
P/N 1010775 Rev. J 10/13
Burger King
ADDENDUM - INSTALLING CLIP STYLE BELT WRAPS
4. Verify both clips on the belt wraps are secured to
the links on the conveyor chains. Then position
both ends of the new belt together and line up so
the lacing is even. Insert the pin to join both sides
of the belt together.
5. Verify belt alignment is even from side to side of
each belt. Reinstall both conveyor covers and top
cover. NOTE: Ensure roller tensioners are adjust-
ed per manufacture specications. (See owners
manual.)
To Next Page
Loading...
