RoviSys OPC90 - Remote Motor Control (Rmc)

OPC90 Server
7.26 Remote Motor Control (RMC)
The RMC OPC90 block is used to retrieve and control the exception reported
output from Bailey Remote Motor Control blocks (function code 136).
Restrictions: This OPC90 block can be utilized with all Bailey interface types
except serial port module (SPM & CPM02).
TAGNAME TYPE ACCESS DESCRIPTION
ADDR_RING VT_I2 Config/Read Bailey ring address.
ADDR_NODE VT_I2 Config/Read Bailey node address.
ADDR_MODULE VT_I2 Config/Read Bailey module address.
ADDR_BLOCK VT_I2 Config/Read Bailey block address.
F1LSD0 VT_BSTR Config/Read Feedback 1 state zero logic state descriptor.
F1LSD1 VT_BSTR Config/Read Feedback 1 state one logic state descriptor.
F2LSD0 VT_BSTR Config/Read Feedback 2 state zero logic state descriptor.
F2LSD1 VT_BSTR Config/Read Feedback 2 state one logic state descriptor.
PERM1LSD0 VT_BSTR Config/Read Permissive 1 state zero logic state descriptor.
PERM1LSD1 VT_BSTR Config/Read Permissive 1 state one logic state descriptor.
PERM2LSD0 VT_BSTR Config/Read Permissive 2 state zero logic state descriptor.
PERM2LSD1 VT_BSTR Config/Read Permissive 2 state one logic state descriptor.
OUTLSD0 VT_BSTR Config/Read Output state zero logic state descriptor.
OUTLSD1 VT_BSTR Config/Read Output state one logic state descriptor.
MESSAGE VT_BSTR Read Provides the block operational message.
TAG VT_BSTR Read Provides the block name.
TAGLONG VT_BSTR Read Provides the block long OPC path name.
TAGDESC VT_BSTR Read Provides the block descriptor.
FACE_TYPE VT_I2 Read Faceplate type (value of RMC block S14).
QUALITY VT_BOOL Read Current quality of Bailey values (0-good, 1-
bad).
DISC_ACT VT_BOOL Read Alarm active indicator.
OUT VT_BOOL Read/Write The Bailey discrete output value.
OUT_TEXT VT_BSTR Read/Write Bailey RCM discrete output value as a string
(see note 1).
RED_CMD VT_BSTR Read/Write Red tag command (see red tag users section).
RED_TAG VT_BOOL Read Red tag indicator (0 – no, 1 – yes).
RED_USERS VT_BSTR Read Red tag users (current user names or codes).
F1 VT_BOOL Read State of feedback number 1.
F1_TEXT VT_BSTR Read State of feedback number 1 as a string.
F2 VT_BOOL Read State of feedback number 2.
F2_TEXT VT_BSTR Read State of feedback number 2 as a string.
FAULT VT_BOOL Read Fault has occurred indicator.
ERR_CODE VT_I2 Read Fault error code (see note 2).
FAULT_ACK VT_BOOL Read/Write Fault acknowledgment (see note 3).
PERM1 VT_BOOL Read Permissive #1 indicator.
PERM1_TEXT VT_BSTR Read Permissive #1 indicator as a string.
PERM2 VT_BOOL Read Permissive #2 indicator.
PERM2_TEXT VT_BSTR Read Permissive #2 indicator as a string.
BAD_START VT_BOOL Read Bad start indicator.
HOLD_STATUS VT_BOOL Read Status on hold indicator.
The RoviSys Company Version 7.0 Page 105