OPC90 Server
GR rom
the
r
command can be written. OPC90 automatically
determines the group size based on current loads
es
alue
ee
OUP WRITES Boolean Config When set, output exception reports generated f
AOL, DOL, ODD, OMSDD, ORCM, ORMC,
ORMSC and OSTN blocks will be written using
output group commands. Up to fifty values pe
and output block updates. This setting optimiz
output exception reporting and should be used
when large numbers of output bocks are
configured. When this option is not set, each v
is sent with individual commands. The rate at
which outputting occurs is also configurable. S
the OUT XRP UPDATE setting.
DEB n the DEVICE block.
useful for diagnosing driver operational
performance. When any of the logging features
e
ging
Events – post communication events
Sends – post messages sent to interface.
UG LOG Boolean
Array
Config Selected by right clicking o
Enables various logging features that may be
are enabled, daily log files are generated in the
OPC90 program directory. Leaving all but the
error option enabled for extended periods of tim
can consume a lot of disk space. The four log
options supported are:
Errors – post miscellaneous errors
Receives – post messages received from
interface.
LOG_DAYS
Logs older than the number of days indicated by
this setting will be automatically deleted.
VT_I4 Config Number of days the debug logs should be retained.
MESSAGE VT_BSTR Read Text message indicating overall status of the
device.
POINT_TOTAL VT_I4 Read Total blocks this DEVICE block has been
requested to exchange data with the Bailey
system.
PRI_STATUS VT_I4 Read Primary communication channel status. A value of
zero indicates good and one means bad.
SEC_STATUS VT_I4 Read Secondary communication channel status. A value
of zero indicates good and one means bad or not
used.
MSG_TOTAL VT_I4 Read Running count of total messages being exchanged
with the Bailey interface.
MSG_RATE VT_I4 Read Messages per second being exchanged with the
Bailey interface.
XRPS_TOTAL VT_I4 Read Running count of total exception report
specifications received from the Bailey interface.
XRP_TOTAL VT_I4 Read Running count of total exception reports
exchanged with the Bailey interface.
XRP_RATE VT_I4 Read Exception reports per second being exchanged
with the Bailey interface.
POLL_TOTAL VT_I4 Read Running count of total values polled from the
Bailey interface.
POLL_RATE VT_I4 Read Polled values per second being read from the
Bailey interface.
NAK_TOTAL VT_I4
received from the Bailey Interface.
Read Running count of total negative acknowledgments
The RoviSys Company Version 7.0 Page 66
To Next Page
Loading...