OPC90 Server
presented for all sixteen module status
t bit. bytes. Bit 0 is the least significan
N
1 e module st of a t be given to the
de and mo . For 1, the ring must
ddress of the U, no IU and
t to a value o. F e set to
d module t value s will result in
ule status r ed fo
2.) The status of the Bailey module is ret Type>,
” where typ dicate tc), state
indicates its current state of operation (E d errors are a summary
rrors it is expe ing. T n the
OPC90_BLY.INI file stored in the wind tomize
ration. The [MODULE ST . The
TYPE] section defines the te add
ociate ames odules introduced
given revision to the O 90 Co
otes:
.) When retrieving th
settings of ring, no
atus
dule
CIU interface special attention mus
all CIU interfaces except the CIU0
match the ring a
module must be se
CI
of tw
de must match the node address of the C
or the CIU01 interface, ring and node must b
a value of zero an
o mod
o a of two. Failure to follow these rule
improper or n eturn r the CIU interface.
urned as a string in the following format “<
<State>, <Errors> e in s the module type (AMM, MFC, COM, e
xecute, Configure, Error) an
of any current e rienc he text for module state and type are defined i
ows base directory. It may be edited to cus
message gene
[MODULE
ATE] section defines the text for module state
xt for module type. You may edit the names or
new type codes and ass d n that correspond to new Bailey m
after any PC nnect - Bailey.
The RoviSys Company Version 7.0 Page 82
To Next Page
Loading...