EasyManua.ls Logo

Rowe GrandSTAR - Sequence of Operation

Rowe GrandSTAR
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting GrandSTAR Internet Jukebox
7-4 22022603
Sequence of Operation
Step 1: Power on the jukebox
With the System Power Supply power switch in the ON position, plug the AC
power from the back of the jukebox into a standard, grounded wall outlet. The
LEDs will light, and the Volume Control Unit display will show dashes.
If the Core Computer does not automatically start to boot-up, press the
Reset/ATX power button (see Figure 1-1) in once and release.
Step 2: The operating system automatically begins to boot. The following is viewed on the
monitor:
Low-level hardware checks
Windows XP Embedded Operating System Loads
GrandSTAR Operating System Loads
Step 3: The user interface (see
Figure
2-7) is viewed on the monitor. No music is in the queue, no selections are available
and the amplifier is muted.
Step 4: Customer provides a form of payment. “Credit” displays a value greater than 0.
For cash:
Bill Acceptor or Coin Acceptor receives the money
Acceptor sends pulse(s) to the Rowelink Controller (no escrow)
Rowelink Controller sends money information to the computer via Rowelink
Computer increases the credits accordingly
Credit is changed on the application (monitor)
Step 5: Customer makes a song selection
For local music:
Customer touches album name, song name, and confirmation to make
selection
Touch-screen sends selection information to the computer
The song is placed into queue and 1 credit will decrement
For downloadable music:
Customer touches song name to make selection
Touchscreen sends selection information to the computer
Application prompts customer to approve that the selection will cost 1 extra
credit
Credits removed and song is placed in queue
Computer begins to download song from internet to the local drive
Once download is complete (may take 3-5 minutes depending on network
traffic and the number of downloaded songs selected before hand)
Step 6: Selection is played
Computer sends a Rowelink message to the 4 Channel Preamplifier to un-mute
the amplifier.
Song is located on the local computer hard drive, and played. Use Volume Control
Unit to adjust volume.

Table of Contents

Related product manuals