Operation
Instruction manual Folding system Page 44 of 100
5.10 FoldManager with inch units
5.10.1 APPs (inch)
The FoldManager contains various apps for using the Folding system.
Table 5: APPs (inch)
LT
The app is used to easily take various meter
readings:
- Linear feet
- Foldings and folded documents
In addition, this app offers 12 permanently
installed folding programs. The app is included
standard within the VarioFold Compact scope
of delivery.
SE
Contains the ROWE FOLD APP LT In addition,
with this app you can define an unlimited
number of user-specific folding programs, with
package widths from 7” to 12” (fan) and 8.25” to
12” (cross). In addition, fan folding of up to
157.48” and cross folding of up to 98.43” is
possible with the ROWE FOLD APP SE. Also
use the app to assign programs to the Favorites
keys.
Transverse folding: If the last layer to be folded
is smaller than 3.5”, it cannot be folded with.
PRO
Contains the ROWE FOLD APP SE. In
addition, you can create special folding
programs with this app, for example for maps
and stationary. Package widths of 3.5” to 16.5”
(fan) and 7” to 16.5” (cross) are possible.
Longitudinal folding: If the length of the
document to be folded is longer than desired
packet width x 21, only the Packet folding type
will be possible.
Transverse folding: If the last layer to be folded
is smaller than 3.5”, it cannot be folded with.
Kit 30
The app includes ROWE FOLD APP SE, as
well as the patented overlength folding without
unfolded intermediate layers, for fan folding up
to 98.43 ft.
Endless Folding is only available for the folding
scheme package.
All folded documents with the folding scheme
package may only be output to the rear after
installation of the app.
Endless Folding Kit 30 may only be used in
conjunction with the Rear Delivery Tray or
Motorised High Volume Tray. Failure to do so
voids ROWE's liability for the function as well
as the warranty.
To Next Page
Loading...