Royal Enfield Bullet User Manual

ROUTINE MAINTENANCE
Introduction
Periodic routine maintenance is a continuous process that commences immediately after
the machine is used. It must
be carried out at specified mileage recordings, or an a calendar
basis
if the machine is not used frequently.
- -
Maintenance should be regarded as an insurance policy, to keep the machine in peak
condition and to ensure long, trouble free service.
The various maintenance tasks are described under their respective mileage and
period.
The intervals between the various maintenance tasks serves only as a guide. As the machine
gets older or used under particularly adverse conditions, it would be advisable to reduce the
period between each check.
For
ease of reference each service operation is described in detail under the relevant heading.
In order to cut the routine maintenance tasks, a good selection of general workshop tools
is
ab~olutel~essential.
Included in the kit must be a range of m
phillips head screw drivers and pair if circlip
No special tools are required for the normal roufine maintenance tasks. The tools contained
in the tool Mt supplied with every new machine will prove adequate for each task, or if they are
not available, the tools found
in the average household will usually suffice.

Royal Enfield Bullet Specifications

General

Displacement	346 cc
Max Torque	28 Nm @ 4000 rpm
Front Suspension	Telescopic, 35mm forks, 130mm travel
Kerb Weight	191 kg
Ground Clearance	135 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Max Power	19.1 bhp @ 5250 rpm
Fuel System	Electronic Fuel Injection
Transmission	5-speed constant mesh
Rear Suspension	Twin shock absorbers with 5-step adjustable preload
Front Brake	280 mm disc, 2-piston caliper
Rear Brake	153mm Drum, Single Lead Internal Expanding
Fuel Tank Capacity	13.5 Litres