3. After a few minutes remove the oil fill cap / dipstick, wipe it clean, and reinsert the dipstick
without screwing it in.
4. Remove the dipstick and examine the oil level on the on the dipstick. The oil level should
be between the upper and lower level marks on the dipstick.
5. If the oil falls below the lower level, add oil through the filler hole. It is very important to
insure there is sufficient oil in the engine.
LOCATION OF LABELS AND SERIAL NUMBERS
SERIAL NUMBERS: You need to know the frame and engine serial numbers to get title
documents for your ATV. You also need these numbers to help your authorized service
center or RPS order parts.
FRAME SERIAL # ENGINE SERIAL #
LABELS: Read and follow all of the warning labels on your ATV. Make sure you understand
all the labels. Keep the labels on the ATV. Do not remove them for any reason. If
To Next Page
Loading...