CLEANING PROCEDURE
A thorough cleaning of your ATV is a necessary part of maintenance. It will help keep
your ATV looking and performing best. Proper cleaning can also extend the life of your
ATV.
It is important to clean and inspect your ATV after every ride, especially if it is used in mud,
brush, grass, water, salt water, or very dusty conditions
The build-up of mud, brush, grass, etc. especially on the engine and exhaust system,
can reduce engine cooling ability, conceal damage, or increase wear of certain parts. It
is important to remove all debris during cleaning.
PREPARATION FOR CLEANING
Wash the ATV before any mud dries on the ATV.
Block or seal the end of the exhaust pipe (muffler) using a piece of plastic wrap,
cloth rag or another method to prevent water from entering engine.
WASHING YOUR ATV
With some care, your ATV can be washed in a similar manner to washing an
automobile.
To Next Page
Loading...