a b c d e f g Air cleaner
WASHING THE ELEMENT
1. Gently wash the air cleaner in clean, non-flammable (high flash point) solvent
such as kerosene-not gasoline. Allow the air cleaner to dry thoroughly before applying oil. A
wet air cleaner will not fully absorb the oil. NOTE: The element should be wet but not
dripping.
2. Soak the air cleaner an equivalent (gear oil: SAE 80-90) until saturated, then squeeze out
the excess oil. NOTE: The element should be wet but not dripping.
Twisting the air cleaner when squeezing out excess oil could damage the air cleaner.
Reassemble by reversing the disassembly sequence.
To Next Page
Loading...