These symbols are used to indicate that proper safety equipment has to be used.
Protective glasses and gloves must be worn
This UV RADIATION sticker is used to refer to a position on or inside the water
system cabinet where exposure to UV light is possible
This ELECTRICAL GROUND sticker is used to refer to a position on the water system
Cabinet or inside where an electrical ground connection is made.
This DANGER sticker is used to refer to a position on the water system Cabinet or
inside of it that could be hazardous.
This symbol indicates useful information, not related to any specific danger.
1.3 - Installation
The instrument must be installed in a dry and dust-free location on a solid and stable surface.
Do not expose the instrument to excessive temperature fluctuation and direct sunlight.
Avoid shocks and vibrations. Ensure good ventilation and do not place the instrument directly in contact with
other equipment.
Leave >1m space in front of the instrument to be able to move the instrument forwards to perform
maintenance activities at the back side.
Avoid installation near devices causing interference e.g. radios, centrifuges, etc. Installation of the
instrument in places where chemicals are stored or gas develops is not permitted.
Introduction
MRN-184-EN Version 6 (05-01-2022)
9
To Next Page
Loading...