8. Confirm that replacement is correctly performed.
Production is started again.
9. Log out or otherwise log-out will occur automatically after 5 minutes of inactivity.
10. Dispose of removed parts according to local regulations.
11.4 - Replacing peristaltic pump tubes
Only to be performed by a trained Lab Technician or FSE. Be aware of liquid spilling, use a cloth
to prevent liquid dripping in the instrument.
The peristaltic pump tubes T28 and T29 have to replaced every 3 months.
Maintenance
MRN-184-EN Version 6 (05-01-2022)
77
To Next Page
Loading...