RTA 460 - Page 30

Default IP Address – 192.168.0.100
460 Gateway User Manual Page 25
2. Click on next to EtherNet/IP Client.
The Enabled? prompt displays. See Figure 2-29.
Figure 2-29 Enable EtherNet/IP Client configuration
3. Click on the Enabled? checkbox.
The Module’s Detail options expand when enabled. See Figure 2-30.
Figure 2-30 EtherNet/IP Client configuration details
4. Click on Save.
For Your Information: Familiar users can make all desired communication
module edits before leaving this screen.
Edit