RTI AD-46-100 - Source Audio Inputs

AUDIO DISTRIBUTION
Technical Support: support@rticontrol.com - Customer Service: custserv@rticontrol.com 12
SourceAudioInputs
TheAD-46-100andAD-810-100amplierscanacceptbothanaloganddigitalaudiosourcesformatrixing
andamplication.Theanaloginputshavebeendesignedforusewithline-levelaudiosources.Digital
inputsacceptmonoorstereoLPCMsignalswitharesolutionupto24-bit192kHz.
Analog Audio Inputs
TheAD-46-100andAD-810-100analoginputsfeatureconnectivityviastandardRCAstyleconnectors.
Theseamplierscansupportbothstereoandmonosources.Additionally,allanalogaudioinputsfeature
audiooutputsthatmirrortheinputsourcesignalsforusewithadditionaldownstreamampliersorother
externalequipment.
1. Connecteitherone(mono)orboth(stereo)RCAmaleconnectorsfromoneendofanRCAmono/
stereocabletotheRCAinputconnectors(1-4ontheAD-46-100or1-8ontheAD-810-100)onthe
amplier.
2. Connecttheaudioconnectors(e.g.RCA,stereomini-jack,etc.)ontheoppositeendoftheRCAcableto
anappropriateline-levelaudiosource.
3. Optionally,connecteitherone(mono)orboth(stereo)RCAmaleconnectorsfromoneendofanRCA
mono/stereocabletotheRCAoutputconnectors(1-4ontheAD-46-100or1-8ontheAD-810-100)on
theampliertotheanalogaudioinputsonadownstreamAD-46-100orAD-810-100amplierusing
steps1and2above.
AUDIO OUTPUTS
COAX
L/R
RTIMS-1MusicStreamer