RTMOTION LCS MK3.1 - Page 10

Controller Menu
Press the MENU button to enter the menu. You can then navigate with the UP, DOWN and SET                 
buttons.
To go BACK one step, press MENU. To abort and pull out of the menu, press POWER.
For a full breakdown of menu functions, see page .
Default Configurations


MK3/S “Slider”
MK3/Z “Force-Zoom”
Large Knob
→
FOCUS
FOCUS
Slider
→
IRIS
IRIS
Force Joystick Y
→
(not present)
ZOOM
Force Joystick X
→
(not present)
(not assigned)
Side Knob A
→
ZOOM
ZOOM SPEED
Side Knob B
→
INTER-OCULAR
INTER-OCULAR

Wireless Channels
Please note, the default channel on the controller is #23 for RF3 (MK3.1). We always recommend               
changing away from channel #23 to decrease the chances of clashing with other users.
Low Battery Indication
The Controller will give a warning and automatically shut down when the battery voltage falls to               
approx 6.1V. This is to protect the Battery from being over-drained and reducing its life.
Power Requirements
Canon LP-E6 battery: 6.2V to 8.4V.
USB Socket: Approx 4.75V to 9V max. Only enabled when LP-E6 removed.
 