Ruhrpumpen API 610 - Page 71

J Line Pump
Horizontal Double Suction Centrifugal Pump – API 610 Process Pump
71 V1.032818
23. Manually place and tighten the hex bolts to secure the radial mechanical seal to the case.
Figure 8.23. Placing and tightening the hex bolts to secure the radial mechanical seal to the case.
NON-COUPLING SIDE (AXIAL) MECHANICAL SEAL
24. Insert the axial throat bushing over the shaft from the non-coupling side until it reaches the
inner shoulder of the case.
Figure 8.24. Inserting the axial throat bushing over the shaft from the non-coupling side.