J Line Pump
Horizontal Double Suction Centrifugal Pump – API 610 Process Pump
99 V1.032818
15. Insert the axial casing cover over the shaft from the non-coupling side until it reaches the
case.
Figure 8.15JD. Inserting the axial casing cover over the shaft from the non-coupling side.
When the casing cover is inserted inside the case, the one step design of the
impeller wear ring and the case wear ring will fix them in place inside the case.
16. Insert the studs to join the axial casing cover to the case.
Figure 8.16JD. Inserting the studs to join the axial casing cover to the case.
To Next Page
Loading...
