To Next Page

To Previous Page

Note:

The power supply voltage of communication interface is DC 3.3V and power supply

ability is limit. Don’t connect other big power Bluetooth or WIFI module, otherwise it will be

burnt.

When using the Bluetooth communication function, if power off for digital power supply,

you need to choose COM interface to connect Bluetooth module again after power on.

If the LED on Bluetooth module is flashing, it shows it is on the state of disconnection.

If LED is lighting, it shows it is on the state of connection.

When using Bluetooth function, don’t put Bluetooth module in the metal box,

otherwise it will affect signal strength, Bluetooth communication distance is up to 10 meters

in an open and unobstructed condition.

When modifying communication data of digital power supply, you must disconnect

Bluetooth with PC, the LED will be flashing. Otherwise you can change the data of Bluetooth

board.

For computer operating system, please install official version. if you install pirated or lite

operating system, there may be a lack of Bluetooth virtual serial port driver on those

operating system, and the system can’t assign COM port to Bluetooth board. And it can’t

communicate with the upper computer.

Do not touch components on the Bluetooth communication module, they are fragile

and can be easily broken.

2.4 Installed the Computer Software

Please download file one by one,do not download all files at the same time,otherwise you will be

charged.

Note: this software can only work on Win7 or above.

DPS3012:no communication function (download link):

http://www.mediafire.com/folder/huu7cydgcw9i3/DPS3012_file

DPS5015 file download link:

http://www.mediafire.com/folder/o96l59h351m19/DPS5015_file

DPS5020 file download link:

http://www.mediafire.com/folder/xmaf7xw1coetq/DPS5020_file

RuiDeng DPS Series User Manual

Questions and Answers: