2.5.2 Introduction of Functions
The computer software interface can be divided into basic functions and advanced
functions.
Basic functions include Voltage/Current setting, shortcut recall, brightness adjustment,
voltage and current curve derivation.
You can set Voltage/Current by turning the knob or enter an value. The graph on the
right shows the real-time voltage and current curves (the curve will be stored for up to 24
hours).
Put the cursor on the Output Voltage curve table, right click and you can see functions
below:
(Note: you can only right click on the table of DPS8005, others do not have this function)
To Next Page
Loading...
Need help?
General
