RuiDeng DPS3003 User Manual

Output Current
accuracy
±(0.5%+5
个
digit)
±(0.8%+5digit)
Output ripple typical
100mV VPP
150mV VPP
Output Voltage
resolution
0.01V
Output Current
resolution
0.001A
Display module open
size
71*39mm
（ Different hardness and thickness materials will be
different, please test before batch use）
Power module size
79*43*41mm
79*43*47mm
79*43*48mm
79*43*55mm
Weight(packet
included)
85g
108g
121g
138g
Note: the following description uses the DPS8005 as an example. Other models have same
functions and operation except for parameters.
1.3 Connection Description
IN+: Input positive IN - : Input negative
OUT+: Output positive OUT- : Output negative
The module is DC-DC step-down output. It must
ensure that the input Voltage is 1.1 times higher than
output Voltage. Under natural heat dissipation
conditions, it can be output at full load. Please install a
fan in the casing.
DC 90.00V is the maximum input Voltage limit and
AC or AC Mains supply 220V must NEVER under any
circumstances be connected to this unit . Do not reverse the battery when charging.
Incorrect use will cause the product to burn out. Please strictly follow the above wiring
instructions and precautions.
Exceeding the limit Voltage, using AC as input, wiring error and battery charging reverse
will cause damage. Some damage is irreversible, so be careful when using the module.
1.4 Panel Description

RuiDeng DPS3003 Specifications

General

Brand	RuiDeng
Model	DPS3003
Category	Power Supply
Language	English