2.3 Bluetooth Communication
The Bluetooth communication module follows the V2.1+EDR Bluetooth specification,
connect digital power supply and communication module with cables (you need to enter
the communication setting interface to initialize the communication parameters of the
Bluetooth module if it is the first time to use Bluetooth communication function).The red
LED of Bluetooth communication module starts to flash after the digital power is turned
on, that means the Bluetooth can be searched. Open the Bluetooth of your computer,
right click on the Bluetooth icon to add the device. Laptop can use its own Bluetooth,
desktop can use the recommended USB Bluetooth adapter, the USB adapter driver will be
automatically installed after plugging in the desktop. You can see Bluetooth icon appears
in the desktop status bar (lower right corner).
Search for a Bluetooth device. The last three digits of the device represent the digital
power address code.
Enter the device's pairing code when connecting to Bluetooth. Default 1234.
To Next Page
Loading...
Need help?
General
