Version: V1.0 Page 9 of 50
• Do not power up the equipment until installation is complete or without professional
confirmation.
2.2.2 Emergency safety measures
In case of fire situations, before using the fire extinguishing device, ensure that the fire extinguishing device can
be used for electrical fires.
Water invasion
To ensure safety, disconnect the micro circuit breaker on the right side of the battery system and
evacuate to a safe position
Electrolyte or gas leakage
If the battery system leaks electrolyte, avoid contact with the leaking liquid or gas. If one is exposed
to the leaked substance, immediately perform the actions described below.
• Gas Inhalation: Evacuate the people in the contaminated area and seek medical aid
immediately.
• Eye Contact: Flush your eye with clean and flowing water for 15 min, and seek medical aid
immediately.
• Skin Contact: Thoroughly rinse the exposed area with soap and water to be sure no chemical or
soap is left on them, and seek medical aid immediately.
• Ingestion: Induce vomiting, and seek medical help immediately.
2.2.3 Other Tips
• All the product are strictly inspected before shipment, please contact us for replacement if you
notice there’s any defectives such as swelling.
• Do not disassemble batteries and components, otherwise the manufacturer will not be
responsible for any damage caused by unauthorized disassembly or repair.
• Do enable the battery to be safely grounded before use to make sure the system in safe and
normal operation.
• Please ensure that the electric parameters of these devices are compatible mutually before
connecting the battery to other devices.
• Please take the environmental factors into careful considerations to ensure that the system can
work in a suitable condition as the environment and storage methods have a certain impact on
the service life and reliability of this product.
To Next Page
