Version: V1.0 Page
33
of 50
4 Pre-installation preparation
The system installation must be finished by qualified person(s), During the whole installation
process, please strictly follow the local safety regulations and related operating procedures.
4.1 Installation environment
The operating environment shall meet the following requirements:
-10℃-50℃(maximum operating range)
15℃-30℃ (optimal temperature)
• Do not expose the battery to direct sunlight, rain and snow.
• Do not place the battery within children/pet touchable area.
• Do not place the battery near heat source and flammable material
• Do not place the battery in a closed place where the ventilation is not
available.
• Do not drop, deform, impact, cut or spearing with a sharp object.
• Do not put heavy things on battery.
• Do not disassemble the battery without Manufacturer's permission.
• No conductive dust and water or other liquid to contact battery.
• Follow the emergency measure if there is water invasion or electrolyte
and gas leakage.
• Contact your supplier within 24 hours if any product failure happens.
To Next Page
Loading...