Version: V1.0 Page
18
of 50
2.7 Battery installation specification
Leave a gap of 30cm above the battery for cable routing.
• After removing the package, place the battery in the required direction, forbid to place it
upside down, sideways, tilted and stacked, avoid any impact or drop that may cause battery
damage and scrap.
Battery placement direction
• The battery installation location should be ventilated, dry and cool environment, away from
heat sources, flammable, humid, organic solvents and corrosive gases, etc., and take good fire
prevention measures. The battery should be placed horizontally and fixed.
• It is strictly forbidden to place installation tools on the battery during the battery installation.
To Next Page
Loading...