Version: V1.0 Page
14
of 50
2.5.1 Lifting safety
• The foundation where the crane operation is carried out must meet the load-bearing
requirements of the crane work.
• When lifting heavy objects, it is strictly forbidden to walk under the boom and lifting objects.
• Personnel who carry out lifting operations need to undergo relevant training and be qualified
before they are allowed to work.
• Lifting tools need to be inspected and the tools are complete before use.
• Before lifting operations, ensure that lifting tools are firmly fixed to load-bearing fixtures or
walls.
• When lifting, it is forbidden to drag the wire rope and spreader and to use hard objects to hit.
• During the lifting process, ensure that the angle between the two cables is not greater than 90°,
as shown in the figure below.
To Next Page